ferevelo.blogg.se - Behringer x32 rack

#Behringer x32 rack series

Clock Master (Choose Dante as clock Master in KLANG:app, consider this as internal clock) (Connect KLANG:fabrik’s Wordclock output to clock slave via BNC cable).

Option 2 – ADAT ExpansionĬonnect ADAT 1–8 from x-ADAT to ADAT 1 of KLANG:fabrik / KLANG:vier and proceed with ADAT9–16 to ADAT2 etc.Ĭlocking options for KLANG:fabrik via KLANG:app Make sure in Dante Controler that the clock setting of the x-DANTE card match in terms of sampling rate and that BOTH “clock master” and “sync to external” are checked for the x-DANTE card. If you want to sync the Dante network to the x32 audio clock choose Synchronization “Local/AES50A/AES50B” according to your needs instead. Make sure the sample rate is matching your Dante networks sampling rate. In x32 go to SETUP -> global and choose Synchronization “ DANTE“. It is convenient to sync the x32’s audio clock to the Dante network. connect the IEM transmitters to the Behringer / MIDAS stage boxes connect Dante out from KLANG to x-Dante as well via Dante Controller. If you want to route the KLANG 3D mixes back and e.g. A linear routing Dante Out (x-Dante) to KLANG:fabrik / KLANG:vier Dante in – channel 1 to channel 1, channel 2 to channel 2, etc.

Now you are ready to proceed with the Dante Routing – Getting Started with DANTE Routing. Connect your WiFi Router to KLANG:fabrik / KLANG:vier CONTROL/NET.Activate the Multicast filter in KLANG:fabrik / KLANG:vier.Connect x32 Control to x-Dante SECONDARY with a network cable.Connect x-Dante PRIMARY to KLANG:fabrik / KLANG:vier DANTE port with a network cable.

If you want to use Control data on the Dante network: Connect KLANG:fabrik / KLANG:vier and the Dante expansion with a network cable or to the same Dante network. Choose the one most suitable for your setup or depending on the hardware you have available. Additionally, the stages boxes offer ADAT outputs and the AES50 stream between stage boxes and console can be converted to ADAT, MADI or Dante as well. There are Dante, ADAT, MADI expansion cards available that all provide 32×32 channels I/O. Both monitor and FoH consoles can share the same stage boxes.Įspecially the x32 Rack (rack mount mixer) and the x32 core are a good companion for KLANG:fabrik and KLANG:vier in terms of a silent stage rack setup. The S16 and S32 stage boxes connect via AES50 to the consoles. The x32/MIDAS M32 is found at FoH and monitor positions. From the top x32, over to the x32 producer and the rack mixer versions.

#Behringer x32 rack series

The Behringer x32 series consists of products in various sizes and form factors. Connecting Behringer x32 / MIDAS M32 to KLANG System